HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 65 Error codes (part code 07010) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WWait a while, and retry the operation. If the same
error occurs despite retrying, please contact HP
Technical Support.
The settings could not be applied.00731107010
EPlease contact HP Technical Support.The password could not be acquired.00731207010
EPlease contact HP Technical Support.Error details not available.00731307010
EIf this problem persists please contact HP
Technical Support.
An error occurred during SVP
processing.
00744007010
iPlease contact HP Technical Support.An internal logic contradiction occurred.00853407010
iSpecify a volume with a supported emulation
type.
The emulation type is invalid.00856807010
WCheck the error code in the Preview list.Some settings could not be applied
normally. Refer to the error code.
00865807010
WMount the required PCB, then retry the operation.The PCB required for this operation is
not mounted. Check the storage system
configuration.
00865907010
iThe operation was ended normally. Execute the
next operation.
The requested operation has completed.00900207010
iAn error occurred during the indicated operation.
See the error code for each operation in the
Preview list.
An error occurred. Check the error code.00900507010
iTo cancel, click [OK].Do you want to cancel?00910107010
iClick [OK] to execute the operation.Do you want to apply?00910207010
iTo continue processing, click [OK]. Otherwise,
click [Cancel].
The option has been changed. If you
continue processing before applying the
00910807010
change, the option will be reset to the
current setting. Do you want to continue
processing?
WTo continue processing, click [OK]. Otherwise,
click [Cancel].
Do you want to execute the Initialize
operation?
00911007010
iCheck the device emulation and the definition of
the SCSI path.
There are no valid volumes.00930307010
WCheck the selected S-VOL.The volume in the pair status is included
in the selected S-VOL.
05500307010
WCorrect the number of selected P-VOLs and
S-VOLs.
The number of selected P-VOLs is not
corresponding to the number of selected
S-VOLs.
05500407010
WTo continue the operation, click [OK].The CLPR used for the P-VOL differs from
the CLPR used for the S-VOL. Do you
want to continue this operation?
05900007010
EClick [Cancel], then please contact HP Technical
Support.
The P-VOL and the S-VOL belong to
different SLPRs. Do you want to continue
this operation?
05904807010
EPlease contact HP Technical Support.The P-VOL and the S-VOL belong to
different SLPRs. If you perform this
05906907010
operation, the storage partition
administrator will become unable to
operate.
Part code 07010 273