HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 63 Error codes (part code 07005) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WThe operation cannot be performed in the current
pair status of Continuous Access Journal. See the
The operation failed because the
specified P-VOL that uses two mirrors in
07825907005
section "Interoperability with other products and3DC cascade, 3DC multi target, or Delta
functions" in the HP XP P9000 Fast Snap Userresync configuration is in one of the
following statuses. Guide or the HP XP P9000 Snapshot User Guide
for the relation between the pair status of
• The volume is in the Continuous
Access Journal Delta resync
configuration.
Continuous Access Journal and the operations of
Fast Snap or Snapshot.
• The volume is a Continuous Access
Journal data volume.
WThe operation cannot be performed in the current
pair status of Continuous Access Journal. See the
The operation failed because the
specified S-VOL that uses two mirrors in
07826007005
section "Interoperability with other products and3DC cascade, 3DC multi target, or Delta
functions" in the HP XP P9000 Fast Snap Userresync configuration is in one of the
following statuses. Guide or the HP XP P9000 Snapshot User Guide
for the relation between the pair status of
• The volume is in the Continuous
Access Journal Delta resync
configuration.
Continuous Access Journal and the operations of
Fast Snap or Snapshot.
• The volume is a Continuous Access
Journal data volume.
WMake sure the MU number can be specified.The command ended abnormally
because the specified MU number is out
of the range that can be specified.
07826107005
WCheck the consistency group status or create a
Fast Snap pair without specifying the CTG mode.
A Fast Snap pair with the CTG mode
specified cannot be created because all
07828907005
the consistency groups have already
been defined.
WSelect a different volume.A Fast Snap pair cannot be created
because the snapshot ID (MU number)
07829007005
that can be used for the volume specified
as the primary volume is depleted.
WCheck the defined snapshot group or select a
different snapshot group.
A Fast Snap pair cannot be created
because all the snapshot groups have
07829107005
already been defined, or number of
pairs that could be registered in the
specified snapshot group have exceeded
the maximum.
WWait until the initialization of the pool is complete,
and then retry the operation.
A Fast Snap or Snapshot pair in which
a V-VOL of Thin Provisioning is set as
07829207005
the primary volume cannot be created
because the Thin Provisioning pool is
being initialized.
WWait until the initialization of the pool is complete,
and then retry the operation.
Failed to create a Fast Snap pair
because the Thin Provisioning pool is
being initialized.
07829307005
WCheck the specified pair type and pool type.The Add Pair (Paircreate) operation
failed because the specified pair type
does not match the specified pool type.
07829407005
WChange the status of pairs related to the specified
primary volume to enable the pair operation, and
then retry the operation.
The Fast Snap pair operation cannot be
performed because all Fast Snap pairs
that share the specified primary volume
are in PSUE status.
07831007005
Part code 07005 271