HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 61 Error codes (part code 06805) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WCorrect the setting, then retry. If the same problem
persists despite retrying, please contact HP
Technical Support.
The CLPR number is duplicated.05522106805
EPlease contact HP Technical Support.This function cannot be used by the
storage partition administrator.
05652406805
Part code 06810
Table 62 Error codes (part code 06810)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WThe operation has been rejected because there
is no data to set. Click [OK], then go on to the
next operation.
No data has been changed.00512206810
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
00744006810
iTo cancel the operation, click [OK].Do you want to cancel?00910106810
iTo execute the operation in Preview, click [OK].Do you want to apply?00910206810
WTo change the mode, click [OK]. Otherwise, click
[Cancel].
The value that is under setup is not
reflected yet. Do you want to change the
mode?
00910606810
WTo continue the processing, click [OK]. Otherwise,
click [Cancel].
The value that is under setup is not
reflected yet. Do you want to continue
the operation?
00910706810
WTo delete the specified line of settings from the
Preview list, click [OK]. Otherwise, click [Cancel].
Do you want to delete the specified line
of settings from the Preview list?
00911106810
WCorrect the setting, then retry. If the same problem
persists despite retrying, please contact HP
Technical Support.
The options "Block Option" and "Donot
Block (Volume Level)" cannot be
specified at the same time.
05521206810
WCorrect the setting, then retry. If the same problem
persists despite retrying, please contact HP
Technical Support.
The Level 2 Threshold setting is incorrect.05521406810
WCorrect the setting, then retry. If the same problem
persists despite retrying, please contact HP
Technical Support.
The Sleep Time setting is incorrect.05521906810
WTo continue processing, click [OK]. To stop
processing, click [Cancel].
This function will apply the setting to all
the target CLPRs. This function will
05904606810
overwrite the setting on a CLPR if the
setting is already applied to the CLPR.
Are you sure you want to continue this
operation?
WTo continue processing, click [OK]. To stop
processing, click [Cancel].
If a CC pair exists, it may become
suspended depending on the settings
05904706810
Are you sure you want to continue this
operation?
248 Messages (part code group 06nnn)