HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 59 Error codes (part code 06510) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
operation, please specify only one LDKC
number.
WCheck whether the specified volume is a LUSE
volume. Also, check storage system's microcode
version.
The number of data volumes exceeds
the maximum.
06901906510
WCheck the number of registered EXCTG.Journals cannot be added to the
extended consistency group (EXCTG),
06902106510
because the number of EXCTG exceeds
the maximum.
WTo continue the operation, click [OK].Do you want to release the remote
command device from the mirror?
06908406510
Otherwise, click [Cancel].
WSelect the same path group ID. WTwo or more path group IDs cannot
coexist in the same mirror.
07900506510
WClose the dialog box by selecting "Refresh the
Pair Operation window after this dialog box is
closed", and then open it again.
A pair was created or deleted for the
volume currently displayed. Close this
dialog box because the configuration of
the pair has been changed.
07900706510
Part code 06610
Table 60 Error codes (part code 06610)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WSpecify the data that you want to register in the
SVP, and retry the operation.
The displayed information has not been
changed. Try again.
00503006610
WCheck the contents, and retry.The Operation value is invalid. Specify
the correct value.
00513706610
WCheck the contents, and retry.The value specified for Gathering
Interval is invalid. Specify a valid value
within the range of 1 to 15.
00513806610
WSpecify the correct CU number.The specified CU number is incorrect.
Specify the correct CU number.
00514006610
WSpecify the correct device number.The specified LDEV number is incorrect.
Specify the correct LDEV number.
00514106610
WCheck the values, then specify correct values.Some of the entered values are incorrect.
Check the values and then specify
correct values.
00514406610
EPlease contact HP Technical Support.An error occurred in the client logic.00730106610
EPlease contact HP Technical Support.An error occurred in the client logic.00730206610
EPlease contact HP Technical Support.An error occurred in the client logic.00730306610
EIf the same error occurs despite retrying, please
contact HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
00744006610
WClick [Refresh], and retry.The system cannot apply the new
configuration. Do you want to refresh?
00810106610
iCheck the port type, then change cable
connections.
Exchange the channel cable connections
after confirmation of the port type.
00900606610
238 Messages (part code group 06nnn)