HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 59 Error codes (part code 06510) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WTo continue the operation, click [OK]. To cancel
the operation, click [Cancel].
The monitoring data saved at present
will be deleted.
05903006510
The current monitoring data will be deleted if you
change the setting of the monitoring switch. If
necessary, use the Performance Monitor Export
Tool to export the monitoring data file.
WTo continue processing, click [OK]. To stop
processing, click [Cancel].
The monitoring data being saved at
present is deleted when the monitoring
switch is set to Enable at the next time.
05903106510
If the currently saved monitoring data is needed,
use the export tool to save the data.
WPurchase a license for Continuous Access Journal,
then install it.
You cannot add journal volumes
because Continuous Access Journal is
not installed.
05903906510
WAll journals are used by Universal Replicator for
z/OS or Continuous Access Journal. If possible,
There are no valid journals.05904206510
delete the journals for Universal Replicator for
z/OS or Continuous Access Journal, then start
the Universal Replicator for z/OS window or the
Continuous Access Journal window.
WReduce the number of journal volumes to be
registered, or increase the number of journal
volumes to be deleted.
The number of journal volumes in some
journals exceeds the maximum.
Adjust the number of journal volumes.
05904306510
WUse the sort function to identify volumes with the
same LDKC number, the same CU number and
the same LDEV number.
The same volume is stored more than
once in the Preview list.
Please use the sort function to identify
volumes with the same LDKC number,
05910006510
the same CU number and the same LDEV
number.
WCreate a volume that can be used as a journal
volume. To do this, add a volume or use some
other way.
There is no volume that can be
registered or deleted.
05910306510
WSpecify a different CU or parity group.The specified CU or parity group does
not contain volumes that can be
registered or deleted as journal volumes.
05910406510
WCheck the CLPR number of the specified volume
and the CLPR numbers of volumes if it is already
Multiple CLPR numbers are existing in
the specified volume, or you tried to
05911306510
existed. Specify a volume so that there is only one
CLPR number in the journal.
register a volume different from the CLPR
number of an existing volume. In one
journal, more than one CLPR numbers
cannot be existed.
WCheck the amount of the Preview data. If the
amount of the Preview data is too large, clear the
The number of Preview data may have
exceeded the limit, or too large number
of data is selected.
05911506510
Preview data by clicking [Apply], and retry the
operation.
If the amount of Preview data is small or there is
no Preview data, too much data is selected.
Reduce the number of data, and retry the
operation.
WCheck the microcode version of the DKCMAIN,
then contact HP Technical Support.
The specified function is not supported
by the current microcode version.
05911606510
Part code 06510 235