HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 59 Error codes (part code 06510) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
iClick [OK].The history file has been updated. Select
the OK button to display the history logs
from the beginning.
00915506510
WCheck the device emulation or the definition of
the SCSI path.
There are no valid volumes.00930306510
WSet the port to Initiator before registering the
storage system.
There are no initiator ports.00930506510
WObtain a license for Continuous Access Journal,
then install it.
The Continuous Access Journal function
is not installed in this controller. You
cannot create pairs.
00930606510
WSince there are duplicated paths in the added
paths, the duplicated paths will be eliminated.
Click [OK] to continue.
You set the same path more than once.
The duplicate paths are excluded.
00930806510
WSince all the added paths are redundant, the
paths cannot be added. Click [OK] and continue.
All paths which you set have already
been registered. This operation will
00930906510
terminate because there is no path which
can be added.
iClick [Refresh] to update the history file. If this
problem persists, please contact HP Technical
Support.
The monitoring time is over, but the
history file is not fully updated yet.
00932706510
iClick [OK], then continue the operation.This operation is not applied yet.00933206510
WCheck the number of data volumes in the journal.
Then delete unused data volume pairs, or register
them in another journal.
Too many data volumes in the journal.05503606510
WCheck the number of mirrors in the journal. Then
delete unused mirrors, or register them in another
journal.
Too many mirrors in the journal.05503706510
WCheck the number of mirrors in the journal group,
then delete unused mirrors.
Too many mirrors in the storage system.05503806510
WCheck the range setting. If you specify "Mirror,"
select only one data volume pair in the mirror.
You are specifying "Mirror" for the
range and trying to manipulate the same
05503906510
mirror. Select only one data volume pair
in the mirror when you specify "Mirror"
for the range.
WCheck the specified controller ID.The specified controller ID cannot be
used.
05520206510
WThe value of "Threshold of start Async JNL" must
equal or be less than the "Threshold of start Sync
JNL" value.
Some of the specified values are
incorrect. Two times the value of "M-JNL
Cache" plus the value of "R-JNL Cache"
05520706510
must be equal to or less than 100. Or,
the value of "Threshold of start Async
JNL" must be equal to or less than the
value of "Threshold of start Sync JNL."
WSpecify the correct journal number.The specified journal number is
incorrect.
05520806510
Specify the correct journal number.
WSpecify normal deletion, or specify "Mirror" as
the range.
There are some pairs where "Mirror" is
not specified as the range in the pairs
specified to be deleted forcibly.
05522906510
Part code 06510 233