HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Part code 06510
Table 59 Error codes (part code 06510)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WSpecify the data that you want to register in the
SVP, and retry the operation.
The displayed information has not been
changed. Try again.
00503006510
WCheck the contents, and retry.The Operation value is invalid. Specify
the correct value.
00513706510
WCheck the contents, and retry.The value specified for Gathering
Interval is invalid. Specify a valid value
within the range of 1 to 15.
00513806510
WSpecify the correct CU number.The specified CU number is incorrect.
Specify the correct CU number.
00514006510
WSpecify the correct device number.The specified LDEV number is incorrect.
Specify the correct LDEV number.
00514106510
WSpecify the correct group number.The specified GID is incorrect. Specify
the correct GID.
00514206510
WSpecify the correct LUN.The specified LUN is incorrect. Specify
the correct LUN.
00514306510
WCheck the values, then specify correct values.Some of the entered values are incorrect.
Check the values and then specify
correct values.
00514406510
EPlease contact HP Technical Support.An error occurred in the client logic.00730106510
EPlease contact HP Technical Support.An error occurred in the client logic.00730206510
EPlease contact HP Technical Support.An error occurred in the client logic.00730306510
EIf the same error occurs despite retrying, please
contact HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
00744006510
WClick [Refresh], and retry.The system cannot apply the new
configuration. Do you want to refresh?
00810106510
iCheck the port type, then change cable
connections.
Exchange the channel cable connections
after confirmation of the port type.
00900606510
iClick [OK].The export is complete.00900906510
iTo continue processing, click [Yes]. If the
processing finishes, reconfigure the port that is
not in operation.
The Port Setting process has not
completed. Do you want to continue for
other ports?
00902106510
iEnsure that the associated channel paths are
offline.
Are you sure you want to exchange the
specified ports? Please confirm the
associated channel paths are off-line.
00902406510
iRemove the remote copy paths that are associated
with the ports.
Are you sure you want to switch the
ports? If the remote copy paths exist on
the ports, delete them beforehand.
00902506510
iTo continue to change ports, click [OK].Are you sure you want to switch the
ports?
00902606510
If any remote copy paths exist on the
ports, delete them beforehand.
Also, to avoid the switching operation
from being reported as a failure, confirm
first that a message prompting you to
Part code 06510 231