HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 57 Error codes (part code 06505) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WVerify the microcode version of the primary
storage system and the models of the primary and
the secondary storage systems.
The Paircreate operation failed because
the primary storage system is one of the
following:
07827406505
• The microcode version does not
support the connection with the
secondary storage system.
• The storage system cannot be
connected with the secondary storage
system.
WIn a configuration where 3 Continuous Access
Journal sites are combined, execute Reverse
The Pairresync operation failed because
the specified restore journal is already
used as a restore journal.
07827506505
Resync for a mirror whose secondary data volume
is also paired in the specified mirror from RAID
Manager or Business Continuity Manager and
then retry the operation.
In other configurations than the above, delete a
mirror whose secondary data volume is also
paired in the specified mirror and then retry the
operation.
WVerify the status of the secondary data volume
from RAID Manager or Business Continuity
The Pairresync operation failed because
the specified secondary data volume is
07827606505
Manager, and then perform the following
operations.
already used as a secondary data
volume in a different mirror and the pair
status is not applicable for the operation.
• In a configuration where 3 Continuous Access
Journal sites are combined, execute Reverse
Resync for a mirror whose secondary data
volume is also paired in the specified mirror
from RAID Manager or Business Continuity
Manager and then retry the operation.
• In other configurations than the above, delete
a mirror whose secondary data volume is also
paired in the specified mirror and then retry
the operation.
WVerify the microcode version of the secondary
storage system. If the microcode version only
The Paircreate operation failed because
the secondary storage system does not
support the specified path group ID.
07828106505
supports "Default" for the Path Gr. ID, specify
"Default" for the ID and then perform the
Paircreate operation.
WWait until the status transition of the different
mirror is complete (Initial/ Stopped), and then
retry the operation.
A pair operation failed because a
different mirror of the specified
secondary journal group is in status
transition (Halting/ Stopping).
07828506505
WIf the extended shared memory is not installed in
the primary storage system, install it, and then
The Add Pair (Paircreate) operation
failed because not enough space is left
07829406505
retry the operation. If the extended sharedin the difference management area of
the primary storage system. memory is already installed in the primary storage
system, a new pair cannot be created because
the number of pairs that can be created in the
system has reached the maximum.
WInstall the extended shared memory in the primary
storage system, and then retry the operation.
The Add Pair (Paircreate) operation
failed because the extended shared
07829506505
memory is not installed in the primary
storage system.
Part code 06505 229