HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 57 Error codes (part code 06505) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WSpecify a volume other than the external volume
mapped for the online data migration, and then
retry the operation.
The Add Pair (Paircreate) operation
failed because the specified P-VOL was
used as an external volume that was
mapped for online data migration.
07814006505
WSpecify a volume other than the external volume
mapped for the online data migration, and then
retry the operation.
The Add Pair (Paircreate) operation
failed because the specified S-VOL was
used as an external volume that was
mapped for online data migration.
07814106505
WSet the 2DC Cascade as disabled, and then retry
the operation.
The journal registration failed because
the 2DC cascade was specified as
enabled.
07816006505
WVerify the settings.A request to create a pair using a
journal in the configuration consisting of
07826506505
three Continuous Access Journal sites
was received. However, the operation
failed because a pair creation for the
Delta resync is specified.
WVerify the serial number, the controller ID, and
the Path Gr.ID of the specified secondary storage
system.
A pair creation failed because the serial
number, the controller ID, or the path
group ID of the specified secondary
storage system is invalid.
07827006505
WVerify the status of the specified primary data
volume.
The Paircreate operation with the 2DC
or 3DC configuration created by using
07827106505
the specified primary data volume failed
because the primary storage system does
not support the 2DC or 3DC
configuration.
WVerify the microcode version of the specified
secondary storage system and the status of the
specified secondary data volume.
The Paircreate operation failed due to
one of the following reasons:
07827206505
• The microcode version of the
specified secondary storage system
does not support the connection with
the primary storage system.
• The secondary storage system does
not support the 2DC or 3DC
configuration created by using the
specified secondary data volume.
WVerify the microcode version of the primary
storage system and the models of the primary and
the secondary storage systems.
The Paircreate operation failed because
the primary storage system is one of the
following:
07827306505
• The microcode version does not
support the connection with the
secondary storage system.
• The storage system cannot be
connected with the secondary storage
system.
228 Messages (part code group 06nnn)