HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 57 Error codes (part code 06505) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WSpecify a mirror ID other than 0, then retry the
operation.
Continuous Access Synchronous,
External Storage Access Manager, or
05845706505
Continuous Access Synchronous Z is
using the specified primary data volume.
Specify a mirror ID other than 0 if you
use this volume to create a pair.
WSpecify the same mirror ID as the registered mirror
ID, then retry the operation.
A different mirror ID has already been
registered in the specified master
journal.
05845806505
Specify the same mirror ID, because only
one mirror ID can be registered in one
journal.
WVerify the status of the specified S-VOL from the
window of Compatible FlashCopy or Compatible
FlashCopy SE.
The operation failed because the
specified secondary data volume was
one of the following:
05845906505
• It was being used by Compatible
FlashCopy.
• It was being used by Compatible
FlashCopy SE.
• It was a TSE-VOL.
WCheck the status of the volume specified as the
primary data volume from the Local Replications
window.
The Add Pair (Paircreate) operation
failed because the volume specified as
the primary data volume is one of the
following:
05848506505
• A P-VOL of Fast Snap or Snapshot in
Reverse Copy status.
• An S-VOL of Fast Snap or Snapshot.
WSelect a different volume, and then retry the
operation.
The Add Pair (Paircreate) operation
failed because the volume specified as
05848606505
the primary data volume is a V-VOL for
Fast Snap or Snapshot.
WCheck the status of the volume specified as the
primary data volume.
The Paircreate operation failed because
the volume specified as the primary data
volume is a Pool-VOL.
05848706505
EA communication error between the primary and
the secondary storage systems occurred, or the
Only the pair option of the primary data
volume was updated. Failed to update
05849006505
microcode of the secondary storage system doesthe pair option of the secondary data
volume. not support the change pair option function.
Check the main microcode of the secondary
storage system, and contact HP Technical Support
to confirm whether the microcode supports the
change pair option function. If the microcode
supports the function, contact HP Technical
Support because a communication error might
have occurred.
WCheck the DKCMAIN microcode version of the
secondary storage system, and contact HP
The Add Pair (Paircreate) operation
failed because the Continuous Access
05850006505
Technical Support to confirm whether theJournal or the Continuous Access Journal
Continuous Access Journal or the ContinuousZ function of the secondary storage
Access Journal Z function supports external
volumes.
system does not support external
volumes.
WCheck the DKCMAIN microcode version of the
secondary storage system, and contact HP
The Paircreate operation failed because
the Continuous Access Journal function
05850106505
Part code 06505 207