HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 57 Error codes (part code 06505) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WCheck the setting of the specified volume in the
Volume Security window.
The specified volume cannot be used as
a journal volume because of a Volume
Security setting.
05834306505
WCheck the volume specified as the secondary data
volume and select a volume other than the LUSE
volume.
The Paircreate operation failed because
the volume specified as the secondary
data volume is a LUSE volume.
05834406505
WBe sure that IO suppression mode of the specified
secondary data volume is enabled on the
The Add Pair (Paircreate) operation
failed due to one of the following
reasons:
05834506505
Universal Volume Mgr window. If the IO
suppression mode is disabled, check the
• The IO suppression mode of the
specified secondary data volume is
enabled.
microcode version of DKCMAIN of the secondary
storage system, and contact HP Technical Support.
• The microcode version of the
secondary storage system does not
support external volumes.
WCheck the settings of the volume specified as the
secondary data volume from the Data Retention
window.
The Paircreate operation failed because
a Data Retention VMA is set on the
volume specified as the secondary data
volume.
05834606505
WCheck the settings of the volume specified as the
secondary data volume from the Volume Security
window.
The Add Pair (Paircreate) operation
failed because the volume specified as
the secondary data volume is set by
Volume Security.
05834706505
WFrom the Data Retention window, check the
settings of the specified primary data volume.
The Paircreate operation failed because
a Data Retention VMA was set up on the
specified primary data volume.
05834806505
WCheck the settings of the volume specified as the
primary data volume from the Volume Retention
window.
The Add Pair (Paircreate) operation
failed because the Protect access
attribute is set on the volume specified
05834906505
as the primary data volume by Volume
Retention.
WCheck the status of the volume specified as the
primary data volume from the Business Copy
window or the Business Copy Z window.
The Paircreate operation failed because
the volume specified as the primary data
volume is one of the following:
05835206505
• A Business Copy S-VOL.
• A Business Copy Z T-VOL.
• A reserved volume.
WExtract a possible combination of program
products from the program products combinations
The operation failed because the volume
specified as the secondary data volume
was is one of the following:
05835306505
described in the message, and then check the
status of the volume specified as the secondary
data volume from the program product window.
• An S-VOL of Business Copy.
• A T-VOL of Business Copy Z or
Compatible FlashCopy.
To use the Thin Provisioning volume as a
secondary data volume, release the attribute of
• A reserved volume of Business Copy
or Business Copy Z.
a program product combined with the Thin
Provisioning volume, and then retry the operation.
• A P-VOL of Business Copy in Swap
or Reverse Copy status.
To use the S-VOL of Business Copy Z as a
secondary volume, if it is shared by the
consistency groups that belong to Business
• An S-VOL of Business Copy Z in
Swap or Reverse Copy status.
Continuity Manager and RAID Manager, release
the shared status, and then retry.
• A P-VOL of Business Copy used in
conjunction with Continuous Access
Synchronous.
Part code 06505 205