HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 56 Error codes (part code 06010) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WSince all the added SSIDs are overlapped, the
operation of adding SSIDs cannot be executed.
Click [OK], and continue.
All SSIDs which you set have already
been registered. This operation will
terminate because there is no SSID
which can be added.
00931106010
WFollow the instructions in the message.Through this operation, M-VOL status
will be changed to Simplex mode even
if the M-VOL is online to the host.
00931606010
iFollow the instructions in the message.The destination volume of the specified
volume pair may contain some
00931706010
inconsistency because volume copy is
not completed yet. Full volume
initialization is required before re-using
it.
iTo delete the pair, even though you cannot
re-execute the R-VOL deletion, click [OK]. If not,
click [Cancel].
As a result of this operation, you will not
be able to re-start ERASE R-VOL
operation.
00931806010
WTry again after the script ends.The specified operation is prohibited
while the script is running.
00932406010
iClick [OK].The script is terminated forcibly.00932506010
iClick [Refresh] to update the history file. If this
problem persists, please contact HP Technical
Support.
The monitoring time is over, but the
history file is not fully updated yet.
00932706010
iClick [OK], then continue the operation.This operation is not applied yet.00933206010
iThe requested operation has started. Click [OK]
to close the dialog.
The requested operation has started.00933706010
WCheck the specified values and retry the
operation.
The specified value exceeds the range.
Alternatively, the relationship between
the specified values is not appropriate.
00936006010
WSelect "Add RCU" command, then register a DKC
path.
If you plan to create a pair with the
specified LUSE volumes, a DKC path is
required.
05503506010
WFind the CUs that can be used by the storage
system specified by the Controller ID.
The storage system specified by
Controller ID is not available for the
particular CU selected from the tree.
05520206010
WCheck the settings of the specified RCU, M-VOL
and R-VOL.
The M-VOL or R-VOL is not supported by
the specified RCU.
05520406010
WRegister the consistency groups, then retry the
operation.
There are no consistency groups
available for the CLPR of the specified
05653706010
volumes. Please register the consistency
groups and then retry the operation.
WCheck the size of the file, decrease the size and
retry the operation.
The size of the specified file exceeds 8
megabytes, so the file cannot be
uploaded.
05654006010
WTo cancel the change operation of the option
parameter, click [OK]. Otherwise, click [Cancel].
Are you sure you want to cancel the
change operation of the option
parameter that you specified?
05900106010
iTo output the file, click [Yes]. Otherwise, click
[No].
Are you sure you want to output the %s
file?
05901106010
iClick [OK].The %s file does not exist.05901206010
Part code 06010 185