HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 56 Error codes (part code 06010) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
EPlease contact HP Technical Support.An error occurred in the client logic.00730206010
EPlease contact HP Technical Support.An error occurred in the client logic.00730306010
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
00744006010
WClick [Refresh], and retry.The system cannot apply the new
configuration. Do you want to refresh?
00810106010
WClick [Yes] to recover from the error condition. If
not, click [No].
An error occurred when copying started.
Do you want to recover from the error
condition?
00892806010
If the recovery fails despite retrying, suspend the
corresponding pair temporarily, and execute
Resume Pair (Pairresync) operation.
iFollow the instructions in the message.Exchange the channel cable connections
after confirmation of the port type.
00900606010
iConfirm that the R-VOLs to specify are varied
off-line.
Please confirm that the R-VOLs to specify
are varied off-line.
00900706010
iClick [OK].SIMs of Remote Copy are cleared.00900806010
iClick [OK].The export is complete.00900906010
iClick [Yes] to continue processing. After
processing is complete, reset the port that is not
in operation.
The Port Setting process has not
completed. Do you want to continue for
other ports?
00902106010
iCheck the contents of the main and remote
volumes. If the contents match, click [OK]. If not,
click [Cancel].
WARNING: Initial copy mode 'None'
is selected for some volume pairs. Are
you sure that the M-VOL and the R-VOL
of these pairs are already synchronized?
00902206010
iFollow the instructions in the message.Are you sure you want to exchange the
specified ports? Please confirm the
associated channel paths are off-line.
00902406010
iTo continue the operation, click [OK]. Otherwise,
click [Cancel].
Are you sure you want to switch the
ports? If the remote copy paths exist on
the ports, delete them beforehand.
00902506010
iTo continue the operation, click [OK]. Otherwise,
click [Cancel].
Are you sure you want to switch the
ports? If any remote copy paths exist on
00902606010
the ports, delete them beforehand. Also,
to avoid the switching operation from
being reported as a failure, confirm first
that a message prompting you to change
the channel cable connections is
displayed, and then perform the
necessary changes.
WTo delete the specified RCU, click [OK].
Otherwise, click [Cancel].
Are you sure you want to delete the
specified RCUs?
00907006010
WTo delete the specified path, click [OK].
Otherwise, click [Cancel].
Are you sure you want to delete the
paths of a specified RCU?
00907106010
WTo delete the specified pair, click [OK].
Otherwise, click [Cancel].
Are you sure you want to delete the
specified volume pairs?
00907206010
iTo suspend the specified pair, click [OK].
Otherwise, click [Cancel].
Are you sure you want to suspend the
specified volume pairs?
00907306010
182 Messages (part code group 06nnn)