HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 54 Error codes (part code 06005) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WConfirm the licensed capacity Mainframe Array
Management on the RCU side. To execute this
The operation failed because the
licensed capacity of Mainframe Array
00898006005
operation, purchase a license key that allows you
to use a larger capacity.
Management on the RCU side was
exceeded.
WSpecify the volume that can be used to create a
pair, then retry the operation.
You cannot create a pair, because the
specified M-VOL is a command device.
00898206005
WSpecify the volume that can be used to create a
pair, then retry the operation.
You cannot create a pair, because the
specified R-VOL is a command device.
00898306005
WVerify that both MCU and RCU support LUSE
volumes that consist of volumes from different CUs.
Cannot create a pair, because LUSE
volumes consisting of volumes from
00898706005
different CUs are not supported by either
the MCU or the RCU.
WVerify that both MCU and RCU support LUSE
volumes consisting of volumes that differ in
capacity.
Cannot create a pair, because LUSE
volumes consisting of volumes that differ
in capacity are not supported by either
the MCU or the RCU.
00898806005
WVerify if the specified M-VOL meets any of the
reasons described in the message.
The specified M-VOL is a volume used
by Compatible FlashCopy or Compatible
FlashCopy SE.
00898906005
The operation failed due to one of the
following reasons.
• The current microcode cannot use a
volume used by Compatible
FlashCopy as an M-VOL.
• The current microcode cannot use a
volume used by Compatible
FlashCopy SE as an M-VOL.
• The M-VOL was a TSE volume.
• "Cylinder" was set for the "Difference
Management" of the M-VOL.
• The M-VOL belonged to a Sync
Group.
WSpecify the volume that can be used to create a
pair, then retry the operation.
A pair cannot be created, because the
specified R-VOL was used by
00899006005
Compatible FlashCopy or Compatible
FlashCopy SE, or was a TSE volume.
EPlease contact HP Technical Support.The attribute of the port assigned to
SLPRs except SLPR0 can only be
changed to Target.
05523006005
EPlease contact HP Technical Support.This function cannot be used by the
storage partition administrator.
05652406005
EIf the problem persists despite retrying, please
contact HP Technical Support.
An error occurred during SVP
processing.
05700506005
WSelect another volume, and retry the operation.A pair cannot be created because the
specified M-VOL is used by Continuous
05831906005
Access Journal or Continuous Access
Journal Z.
WIf the Add Pair (Paircreate) operation failed:The operation failed because the
specified R-VOL was used by Continuous
05832006005
• When the RCU runs on the 2DC configuration
in which the Continuous Access Journal
Access Journal or Continuous Access
Journal Z.
cooperates, wait for a while until the pair
172 Messages (part code group 06nnn)