HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 54 Error codes (part code 06005) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WConfirm the R-VOL status.R-VOL status change failed after M-VOL
status change. Confirm R-VOL status.
00884206005
WThe operation failed, because of one of the
following reasons:
Suspend (Pairsplit-r) operation failed
because specified volume or other
volume in the same group is not in
permissible status.
00884306005
• The specified volume is simplex.
• There is no duplex or duplex-pending volume
in the group.
• Either the specified volume or another volume
in the same group is suspended.
Verify the volume status, and retry the operation.
WThe operation failed, because of one of the
following reasons:
Suspend (Pairsplit-r) operation failed
because specified volume or other
volume in the same group is in status
transition.
00884406005
• The specified volume or another volume in the
same group is deleting.
• The specified volume or another volume in the
same group is suspending.
Wait for the change in status to be completed,
then retry the operation.
EIf this problem persists, please contact HP
Technical Support.
An internal error occurred.00884606005
EIf this problem persists, please contact HP
Technical Support.
An internal error occurred.00884706005
WThe suspend pair (Pairsplit-r) operation failed. A
few minutes later, refresh the window, confirm if
Please wait a few minutes and retry the
Suspend Pair(Pairsplit-r) operation.
00884806005
the specified volumes are in the permissible status,
then retry the operation.
WThe specified volume is not part of a Continuous
Access Synchronous pair. Check the volume.
Specified volume is not part of Remote
Copy pair (Not in Duplex(PAIR),
Pending(COPY), Suspend(PSUS) state).
00884906005
WCheck the serial number, SSID, link address and
controller ID of the RCU, and set the correct value.
Invalid RCU serial number, SSID, Link
Address or Controller ID.
00885006005
Then retry the operation. If the same error occurs,
please contact HP Technical Support.
WRefresh the window, and check whether the
specified volume is a R-VOL.
The specified volume is not a R-VOL.00885106005
WConfirm the R-VOL status.R-VOL status change failed after M-VOL
status change. Confirm R-VOL status.
00885206005
WThe operation failed, because of one of the
following reasons:
Delete Pair(Pairsplit-S) operation failed
because M-VOL is in Simplex(SMPL)
status.
00885406005
• The specified volume is simplex.
• There is no duplex, duplex-pending, or
suspend volume in the group.
Verify the volume status, and retry the operation.
Part code 06005 167