HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

8 Messages (part code group 06nnn)
This chapter lists the Remote Web Console error messages with part code 06000 to 06999 and
provides recommended action for each error.
Part code 06005
Table 54 Error codes (part code 06005)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
EIf the problem persists despite retrying, please
contact HP Technical Support.
An error occurred during SVP
processing.
00501306005
EIf the problem persists despite retrying, please
contact HP Technical Support.
An error occurred during SVP
processing.
00509906005
WRefresh the window, and then retry the operation.
If this problem persists, contact HP Technical
Support.
This function does not support the
specified port.
00514506005
EIf the problem persists despite retrying, please
contact HP Technical Support.
An error occurred during SVP
processing.
00600006005
EIf the problem persists despite retrying, please
contact HP Technical Support.
An error occurred during SVP
processing.
00601206005
WIf the same problem persists despite retrying,
please contact HP Technical Support.
The SVP is busy. Please wait for a while,
and then retry the operation.
00602306005
WIf the problem persists despite retrying, please
contact HP Technical Support.
Time out error.00800006005
WIf the problem persists despite retrying, please
contact HP Technical Support.
Time out error.00800106005
WIf the problem persists despite retrying, please
contact HP Technical Support.
Time out error.00810006005
WWait for a while, and then refresh the window
and confirm the pair status has been changed
properly.
The storage system has accepted the
request normally, however the
processing requires some time. Wait for
00810406005
If the pair status is not changed despite refreshing
the window, check the MCU or RCU configuration
a while, then refresh the window and
confirm the pair status has been
changed properly.
and the condition of the paths between the MCU
and RCU.If the pair status is not changed despite
refreshing the window, check the MCU
or RCU configuration and the condition
of the paths between the MCU and RCU.
WRetry the operation.Please retry operation.00870006005
WA logical path does not exist between the MCU
and the RCU. Check the path status on RCU Status
Logical Path between the MCU and the
RCU is not active.
00870106005
dialog box, and reestablish the paths with Edit
Path.
WRefresh the window, and check whether the
specified volume is a M-VOL.
The specified volume is not a M-VOL.00870206005
WThe number of paths is less than the minimum
number specified on the RCU Option dialog box.
The specified number of Paths is less
than the Minimum number of Paths on
RCU Option screen.
00870306005
Check the number of paths, establish the minimum
number of paths, and retry the operation.
158 Messages (part code group 06nnn)