HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 42 Error codes (part code 04005) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WTo use the prestaging function, set the prestaging
area by using Cache Residency.
The prestaging is not executed because
the prestaging area does not exist.
Check the Cache Residency setting.
05654204005
WWait, then retry the operation.The current Cache Residency setting
cannot be changed because the sidefile
size exceeds the threshold.
05851104005
EWait, then retry the operation.The current Cache Residency setting
cannot be changed because the
prestaging operation is in progress.
05851204005
WWait for a while, refresh the window, and retry
the prestaging operation. Or, check that the
Prestaging not completed.05851304005
storage system is not blocked. If the problem
persists, contact HP Technical Support.
EPlease contact HP Technical Support.Currently running microcode version
does not support the specified operation.
05851404005
WWait, then retry the operation.The specified operation cannot be
executed because one of the following
maintenance operations is in progress.
05870904005
• LDEV formatting
• Correction Copy
• Drive Copy
• Changing CHA/DKA status
• Changing the cache status
• Replacing an OEM drive microcode
• LDEV Shredding or Extent Shredding
WLog out, and then log back in with access to the
resource group containing the specified LDEV.
The specified LDEV belongs to a
resource group that you do not have
permission to access.
07501504005
WVerify the device emulation type of the specified
LDEVs.
The device emulation type of the
specified LDEVs is not supported.
07503104005
WSpecify volumes other than those in the online
data migration process.
Some of the specified volumes are in the
online data migration process.
07504104005
Part code 04010
Table 43 Error codes (part code 04010)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
iCorrect the specified content, and issue the
request again.
Part of the range is already in use.00103004010
iCorrect the specified content, and issue the
request again.
The specified value is outside the valid
range.
00103204010
EWait a while, click [Refresh], and change the
same configuration again. Check the DKC status.
Prestaging not completed.00208004010
If the same error occurs, please contact HP
Technical Support.
WCorrect the values specified as the starting and
ending addresses, then retry the operation.
The value specified as the ending
address for the data to be placed in
00501004010
Part code 04010 129