HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 38 Error codes (part code 03122) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WCheck the specified pool ID, then retry the
operation.
The specified pool ID is incorrect.10601803122
WSpecify a pool ID that is smaller than the one
specified before, then retry the operation.
The allocation cannot be done from the
specified pool ID.
10601903122
WSelect the same volume type, then retry the
operation.
The selected volumes cannot be specified
as a pool volume, because the volume
types are different.
10602103122
WSpecify the volumes that have the same cache
mode, then retry the operation.
The selected volumes cannot be specified
as a pool volume, because the cache
modes of the selected volumes coexist.
10602203122
WSpecify the volumes that have the same CLPR,
then retry the operation.
The selected volumes cannot be specified
as a pool volume, because different
CLPRs selected coexist.
10602303122
WRestore the status of the pool, and then retry the
operation.
The operation cannot be executed,
because the specified pool is blocked.
10602403122
WDelete the pool.The operation cannot be executed,
because the specified pool is blocked.
10602503122
WRestore the status of the pool volume, then retry
the operation.
The operation cannot be executed,
because the pool volume is blocked.
10602603122
WCheck the usage rate of the pool, and then retry
the operation.
The operation cannot be executed,
because the pool usage exceeds the
threshold.
10602703122
WStop the shrinking operation on the pool, and
then retry the operation.
The operation cannot be executed,
because the specified pool is in shrinking
operation.
10602803122
WCheck the status of the pool, and then retry the
operation.
The operation cannot be executed,
because the specified pool is in Normal
status.
10602903122
WDelete the associated Thin Provisioning volume,
then retry the operation.
The operation cannot be executed,
because the specified pool is associated
with a Thin Provisioning volume.
10603003122
WCheck the pool usage, then retry the operation.The operation cannot be executed,
because the specified pool is being
used.
10603103122
WCheck the status of the pool.The operation cannot be executed,
because the specified pool is not in
shrinking operation.
10603203122
WCheck the pool type.The operation cannot be performed
because the specified pool is for
Snapshot or Fast Snap.
10603303122
WCheck the following settings, and then retry the
operation.
The shrinking operation cannot be
performed on the specified pool due to
one of the following reasons.
10603403122
• Pool capacity
• The usage rate after shrinking
becomes higher than the highest
• Pool usage capacity
• Depletion threshold value
threshold set among the depletion
threshold, the warning threshold, and
the system threshold.
• Warning threshold value
• System threshold value
• There is no pool volume that has
enough free space necessary to
• Pool VOL with System Area Capacity
112 Messages (part code group 03nnn)