HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 36 Error codes (part code 03022) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
ECheck the setting(s).LDEV that has already been set has been
selected.
10519103022
ECheck the setting(s).LDEV not set has been selected.10519203022
WCheck the setting(s).The number of data patterns exceeds the
setting range.
10519303022
EExecute refresh, then retry the operation. If the
same problem persists despite retrying, please
contact HP Technical Support.
An error occurred while formatting.10519403022
EExecute refresh, then retry the operation. If the
same problem persists despite retrying, please
contact HP Technical Support.
An error occurred while preparing the
quick format.
10519503022
ECheck the setting(s).Any further, the Pool that selects it cannot
set the volume.
10520503022
EExecute refresh, then retry the operation. If the
same problem persists despite retrying, please
contact HP Technical Support.
An error occurred in the shredding
processing.
10523103022
ESpecify another unused SSID number.The same SSID is specified.10523203022
EEnter the SSID number with 4 digits.The specified number of digits for SSID
is incorrect.
10523303022
EExecute refresh.The processing cannot continue due to
an internal logical contradiction.
10524803022
WCheck the setting(s).Insufficient free space to create LDEV.10524903022
ECheck the setting(s).Two or more Basic exists together to
External.
10525003022
EPlease operate it again after executing Shredding.There is no output file.10525903022
WCheck the setting(s).An LDEV that the Snapshot is set has
been selected.
10526303022
iClick [OK] to shred.Volumes that can be shredded in the
selected volumes will be displayed.
10526703022
WSelect the free spaces again from the Select Free
Space window.
The selected status will be canceled
because the number of free spaces that
10527003022
exist in the selected parity group
exceeds the number that can be set.
WSelect the free spaces again from the Select Free
Space window.
The number of free spaces that exist in
the selected parity group exceeds the
number of volumes that can be set.
10527103022
WCheck the setting(s).Data Output cannot be set more than 3.10527203022
iWait for a while, then retry the operation.The interruption process cannot be done
because there is an unexecuted specified
task.
10527303022
iThe task status is changed. Close the window,
then check the task status.
The interruption processing was
completed.
10527403022
iCheck the setting(s).The current setting exceeds the maximum
number of quick formatting that can be
executed.
10527503022
Part code 03022 107