HP XP P9000 RAID Manager User Guide (T1610-96059, January 2014)
Table 30 Pair status versus Continuous Access Synchronous and Continuous Access Journal commands
Continuous Access Synchronous command-
pairresyncpairsplitpaircreate
Resync-S option-P option-r or -rw optionNocopyCopyStatus#
RejectedAcceptableRejectedRejectedAccepted 3Accepted 2SMPL1
AcceptableAccepted 1Rejected.Accepted 4AcceptableAcceptableCOPY2
AcceptableAccepted 1Accepted 4Accepted 4AcceptableAcceptablePAIR3
Accepted 2*Accepted 1AcceptableAcceptableRejectedRejectedPSUS4
Accepted 2*Accepted 1AcceptableAcceptableRejectedRejectedPSUE5
Accepted 2*Accepted 1RejectedRejectedRejectedRejectedPDUB6
Legend:
Accepted = Accepted and executed. When the operation terminates normally, the status changes to the indicated number.
Acceptable = Accepted but no operation is executed.
Rejected = Rejected and operation terminates abnormally.
Pairsplit of a Continuous Access Asynchronous volume is returned after verification of state transition
that waits until delta data is synchronized from P-VOL to S-VOL.
NOTE: In the case of the SSWS status after S-VOL-SSUS-takeover execution, the pairresync
command (from P-VOL to S-VOL) is rejected because the delta data for S-VOL becomes dominant,
and its status is expected to be using the -swaps(p) option of pairresync. If the pairresync command
(from P-VOL to S-VOL) is rejected, confirm this special status using the -fc option of the pairdisplay
command.
The following table shows the relation of command acceptances for paired status and Business
Copy.
Table 31 Pair status versus Business Copy commands
Business Copy command-
pairresyncpairsplitpaircreate
Resync-S option-C option-E option-splitNo -splitPair Status
RejectedAcceptableRejectedRejectedAccepted 2 to 4Accepted 2SMPL1
AcceptableAccepted 1Accepted [1] 2
to 4
Accepted 5Accepted [1] 2
to 4
AcceptableCOPY
RCPY
2
AcceptableAccepted 1Accepted [2] 2
to 4
Accepted 5Accepted [2] 2
to4
AcceptablePAIR3
Accepted 2Accepted 1AcceptableAccepted 5AcceptableRejectedPSUS4
Accepted 2Accepted 1AcceptableAcceptableAcceptableRejectedPSUE5
Legend:
Accepted = Accepted and executed. When the operation terminates normally, the status changes to the indicated number.
Acceptable = Accepted but no operation is executed.
Rejected = Rejected and operation terminates abnormally.
In the following descriptions, when the pair statuses of P-VOL and S-VOL are different, P-VOL_ or
S-VOL_ are applied to show which volume is indicated.
144 Data replication operations with RAID Manager