HP XP P9000 RAID Manager Release Notes (T1610-96060, January 2014)

Supported hardwareSupported operating system
zSeries or S/390 processorsSuSE Linux Enterprise Server 8 or 9 or later on Microsoft
Windows XP
Pentium or compatible processorsVMware ESX Server 2.5.1 or later
Enhancements
• Added a description when querying for command status.
• Added commands for Priority Port Control Management.
• Added additional output line to show Thin Provisioning State when querying ldevs.
• Added support for renaming pools.
• Support for specifying Terabytes (T/t) as units when creating ldevs.
• Added Support for Continuous Access Sync Consistency Group M*N Control.
• Support for using inqraid in Windows Power Shell by replacing RAID manager variables that
start with '$' to '%'.
• Added RAID Manager binaries for Linux/x64.
• Added “/dev/rcdisk/disk*” for finding cluster DSF for MCSG/ HP-UX.
• Support for viewing the Virtual ID for a resource group.
• Added an option for setting an LDEV/RAID Group/External Group to a specific CLPR.
• Added an option for setting the Load Balance Mode for External Storage.
• Added an option for setting the Virtual SSID for a virtualized volume.
Fixes
None.
Prerequisites
If you use the following software, install the RAID Manager/LIB that is under the ../RL directory
on the CD.
• BMC Enterprise Snapshot software
• Remote performance monitor provided by HP
• HP Omniback software
• RAID management software provided by HP or other vendor
Installation instructions
See the following user guide for installation instructions:
HP XP P9000 RAID Manager Installation and Configuration Guide
Part number: T1610-96062
Edition date: January 2014
Enhancements 7