HP StorageWorks RAID Manager XP user guide (T1610-96005, March 2006)

40 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
MPE/iX
An example horcm.conf file can be found in the /HORCM/etc directory.
See Appendix E, Porting notice for MPE/iX (page 371).
Open VMS
See Appendix F, Porting notice for OpenVMS (page 381).
Creating an instance configuration file
When you create an RM configuration file, follow this naming convention,
where instance is the instance number:
horcminstance.conf
Example
horcm0.conf
The configuration file has four sections:
HORCM_MON (page 42)
HORCM_CMD (page 44)
HORCM_DEV (page 47)
HORCM_LDEV (page 50)
HORCM_INST (page 51)
You can use the mkconf command to create a configuration file. See
mkconf (page 135) for usage information.
If the level of detail provided in the following pages is not sufficient, ask
your HP representative to consult the HP internal document:
RAID Manager XP Basic Specifications
For examples of configuration files, see Appendix A, “Configuration file
examples” (page 283).