HP StorageWorks RAID Manager XP user guide (T1610-96005, March 2006)

198 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
PFUS is set when the snapshot pool exceeded the threshold of the PSUS
state.
PFUL is set when the snapshot pool exceeded the threshold of the PAIR
state.
Example
# pairvolchk -g oradb
pairvolchk : Volstat is P-VOL.[status = PAIR ]
Other than 0 to 127 (For the error cause and details, see the execution logs):
236:EX_ENQVOL
237:EX_CMDIOE
235:EX_EVOLCE . . . When the –c argument is specified
242:EX_ENORMT. . . When the –c argument is specified
16:EX_EXTCTG
214:EX_ENQCTG
When a volume group contains volumes in different states, one state will
take precedence and will be reported for the group as shown in the
following table.