HP StorageWorks RAID Manager XP user guide (T1610-96005, March 2006)

185
(HP-UX, Linux, Solaris, Windows NT/2000/2003, AIX,
and MPE/iX only)
Searches the RM configuration file
(local instance) for a volume that matches the specified
raw device. If a volume is found, the command is
executed on the paired volume (
–d) or group (–dg).
This option is effective without specification of the
–g group option.
If the specified raw_device is listed in multiple device
groups, this will apply to the first one encountered.
–d[g] <seq#> <LDEV#> [MU#]
Searches the RM instance configuration file (local
instance) for a volume that matches the specified
sequence # and LDEV. If a volume is found, the
command is executed on the paired logical volume (
–d)
or group (
–dg).
This option is effective without specification of the
–g group option.
If the specified LDEV is listed in multiple device
groups, this will apply to the first one encountered.
seq # LDEV # can be specified in hexadecimal (by the
addition of 0
x) or decimal format.
–fq Displays the number of remaining Q-markers in the CT
group in the sidefile.
# pairsyncwait -g oradb -nowait -fq
UnitID CTGID Q-Marker Status Q-Num QM-Cnt
0 3 01003408ef NOWAIT 2 120
# pairsyncwait -g oradb -nowait -m 01003408e0 -fq
UnitID CTGID Q-Marker Status Q-Num QM-Cnt
0 3 01003408e0 NOWAIT 2 105
# pairsyncwait -g oradb -t 50 -fq
UnitID CTGID Q-Marker Status Q-Num QM-Cnt
0 3 01003408ef TIMEOUT 2 5