HP StorageWorks RAID Manager XP user guide (T1610-96005, March 2006)

155
M = “W” P-VOL and PSUS state: indicates that S-VOL is
suspending with R/W enabled.
S-VOL and SSUS state: indicates that S-VOL has
been altered since entering SSUS state.
M = "-" S-VOL and SSUS state: indicates that S-VOL has
NOT been altered since entering SSUS state.
P-VOL and PSUS state: indicates that S-VOL is
suspending with Read only.
M = "N" COPY/RCPY/PAIR/PSUE state: indicates that the
volume is Read-disabled.
M = "C" Indicates a bitmap table is managed with each cylinder.
M = "T" Indicates a bitmap table is managed with each track.
M = "U" Indicates a bitmap is unknown.
% The table below shows percentages for Async-CA,
Sync-CA, and BC.
CR Shows the copy operation rate.
BM Shows the (identical) percentage of PVOL &
SVOL BITMAPs.
SF Shows the Side File percentage for each CT group
in relation to a 100% full side file in cache.
The following is an arithmetic expression using the
High Water Mark (HWM) as 100% of a side file space:
HWM (%) = 30 / Side File space (30 to 70) * 100
State
Volume
Async-CA Sync-CA BC
COPY PAIR OTHER COPY PAIR OTHER COPY PAIR PVOL_PSUS
SVOL_COPY
OTHER
PVOL CR SF BM CR BM BM CR CR BM CR
SVOL SF BM BM BM CR CR CR CR