HP StorageWorks RAID Manager XP user guide (T1610-96005, March 2006)

143
cc (BC only) Used to specify the Cruising Copy mode
for volume migration. This option cannot be used with
the -split argument. This option is ignored if -c <size>
is used.
–nocopy (CA only) Creates paired volumes without copying
data. The data consistency of SMPL volumes is assured
by the user.
–pid <PID> (SnapShot only) Identify the SnapShot pool with a pool
ID. LDEV’s in a group that has a PID belong to the
specified SnapShot pool. If a specific PID is not given,
the LDEVs will be designated with the default pool ID
(0).
–q Terminates interactive mode and exits this command.
–split (BC/SnapShot only) Splits the paired volume after
completing the pairing process.
-split works differently based on the microcode
version:
XP256 microcode 52-46-xx or over
XP512 microcode 01-10-00/xx or over
XP1024/XP128
XP10000
XP12000
This option will return immediately with the
PVOL_PSUS and SVOL_COPY state changes. The
SVOL state will be changed to SVOL_SSUS after all
data is copied.
XP256 microcode 52-46-yy or under
XP512 microcode 01-10-00/xx or under:
After the command is executed, the volume status will
be PVOL_COPY and SVOL_COPY. The PVOL and
SVOL states will be changed to PVOL_PSUS and
SVOL_SSUS after all data is copied.