HP StorageWorks RAID Manager XP user guide (T1610-96005, March 2006)

RAID Manager command reference 121
inqraid
Display array information HP-UX, Linux, Solaris, AIX, and MPE/iX only
Description The inqraid command displays the relationship between a host device
special file and an actual physical drive in the disk array.
Syntax inqraid { –CLI [W|WP|WN] | –f[c][g][h][l][p][v][w][x] | –find[c] |
–gplba | –gplbaex | –gvinf | –gvinfex | –h | –inqdump | –inst | quit |
–sort[–CM][-CLIB] | special_file | –svinf[=PTN] | –svinfex[=PTN] }]
Arguments –CLI Specifies structured output for Command Line
Interface parsing.
The column data is aligned in each
row. The delimiters between columns are either a space
or –.
–CLI[W|WP|WN](Not for use with Tru64 or Digital UNIX) Displays the
WWN (World Wide Name) and LUN in CLI format.
-fc used to calculate the Bitmap page of cylinder size for
HORC
-fg Displays a LUN in the host view by finding a host
group for XP 128 and XP 1024 arrays.
-fh Specifies CA/CA Journal for the Bitmap pages when
used with
-sort -CLIB.
–fl Indicates an LDEV Guard volume with the -CLI
option by appending “*” to the device file name.
–fp Indicates an Oracle validation volume with the -CLI
option by appending “*” to the device file name.
–fv (Windows NT/2000/2003 only) Displays the
Volume{GUID} via $Volume in wide format.
-fw Displays the cascading volume status on STD Inquiry
Page. If this option will not be specified, then the
display will show four cascading mirrors the same as at