HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 33 Error codes (part code 3005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WVerify the cache mode of the subject
external volumes.
External volumes with mixed cache
mode setting, enabled and disabled,
781113005
cannot be used as pool volumes in a
THP pool.
WVerify the cache mode of the subject
external volumes.
External volumes with cache mode
disabled cannot be specified as pool
volumes for the pool.
781123005
EExecute the instructions noted in Thin
Provisioning of the Web Console section,
and then retry the operation.
THP pool initialization cannot be done
because the THP V-VOL is used by
another program product.
781133005
WCheck the status of the pool, and then
retry the operation.
The operation cannot be done because
the specified pool is in relocating
operation.
781143005
WCheck the status of the pool, and then
retry the operation.
The operation cannot be done because
the specified pool is in monitoring
operation.
781153005
EIf the same problem persists despite
retrying, please contact HP Technical
Support.
The processing cannot continue due to
an internal logical contradiction.
781163005
WCheck the settings.Reclaim Zero Pages cannot be done for
the TSE volume.
781243005
Part code 3010
Table 34 Error codes (part code 3010)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WReduce the number of Cache Residency
settings, then retry the operation.
The number of Cache Residency settings
has exceeded the maximum number of
available Cache Residency areas.
10463010
Part code 03022
Table 35 Error codes (part code 03022)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the setting(s).SSID cannot be allocated to all the LDEVs
with the specified initial SSID.
10513103022
WCheck the setting(s).Short of {0} LDEV ID(s).10513203022
EExecute refresh.The processing cannot continue due to
an internal logic contradiction.
10513303022
EExecute refresh.The specified LDEV does not exist in the
configuration.
10513403022
WCheck the setting(s).The selected LDEV has an LUN path
setting.
10513503022
WCheck the setting(s).The specified LDEV is a pool volume.10513603022
WCheck the setting(s).The selected LDEV has an LDEV Security
setting.
10513703022
Part code 3010 99