HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 33 Error codes (part code 3005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WWhen the pool cannot be deleted, do
the following:
Failed to delete the pool.
Pool cannot be deleted when:
687983005
• Check the installation status of the
V-VOL management area, when the
• The V-VOL management area is not
initialized.
V-VOL management area is not
initialized.
• The V-VOL management area is not
installed.
• Check the installation status of the
V-VOL management area, when the
• A Snapshot pair still remains in the
pool.
V-VOL management area is not
installed.
• A P-VOL still remains in the pool.
• Delete the Snapshot pair if it still
remains in the pool.
• A Pool-VOL in the pool is blocked.
• The process to delete a Thin
Provisioning volume is being
executed.
• Delete the Snapshot pair if P-VOL still
remains in the pool.
• Restore the status of Pool-VOLs in the
pool when the pool is blocked, then
retry the operation.
• Update the display content and
confirm that the usage rate of the pool
is zero, then retry the operation.
WWhen the pool threshold cannot be
changed, do the following:
Failed to change the threshold of the
pool. The threshold of the pool cannot
be changed when:
687993005
• Update the display content and
confirm the usage rate of the pool.• The threshold is set below the usage
rate of the pool.
• Wait for shrinking the pool to end if
it is shrinking. Then retry the
operation.
• The pool is shrinking.
• The Pool-VOL in the pool is blocked.
• Check the status of the Pool-VOL in
the pool and restore it if it is blocked.
Then retry the operation.
WSet the Audit Log buffer function to
"Disable," then retry the operation.
The specified volume includes a system
disk being used by the audit log.
688023005
WRecover the pool, then retry the
operation.
The pool is blocked.688183005
WRecover the volume, then retry the
operation.
The specified volume cannot be
processed because it is blocked.
688193005
EAssociate the volume with a pool, then
retry the operation.
The specified volume cannot be
processed, because it is not associated
with a pool.
688203005
If this problem persists, please contact
HP Technical Support.
EWait until the Business Copy or Business
Copy Z process is completed, and then
retry the operation.
The specified volume is currently used
by Business Copy or Business Copy Z.
688213005
If this problem persists, please contact
HP Technical Support.
EWait until the process of Snapshot is
completed, then retry the operation.
The specified volume is currently used
by Snapshot.
688223005
If this problem persists, please contact
HP Technical Support.
Part code 3005 93