HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 33 Error codes (part code 3005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
or Quick Restore is not in the operation,
then retry the operation.
WCheck the specified volume.The specified volume contains a quorum
disk.
657673005
WCheck the specified volume.The specified volume includes a remote
command device being used by a
mirror of the journal group.
657903005
WCheck the setting of the specified volume.The specified volume is not a Thin
Provisioning volume.
687223005
EPlease contact HP Technical Support.An internal logic contradiction occurred
on the DKC side.
687233005
WInstall the shared memory.Shared memory is not installed.687243005
WDelete the unnecessary Thin Provisioning
Pools (THP Pool) and Thin Provisioning
The shared memory for the V-VOL
management area is insufficient.
687253005
volume (V-VOL), then retry the operation.
If this problem persists, please contact
HP Technical Support.
WCheck volume capacity for the V-VOL.The capacity of Thin Provisioning
volume (V-VOL) is insufficient.
687263005
WWait a while, then retry the operation.Shared memory is being initialized.687273005
WRecover the pool, then retry the
operation.
The pool is in an abnormal state.687283005
WRetry the operation after the formatting
operation has completed.
LDEV format is being executed in the
specified volume.
687293005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
687363005
WCheck the current configuration of
association.
The number of Thin Provisioning
volumes that can be associated with a
687483005
single pool has exceeded the
maximum.
WWait for a while, then retry the
operation.
The disk storage system is executing the
processing to release the association,
inside.
687513005
EIf this problem persists, please contact
HP Technical Support.
An error occurred on the DKC side.687613005
WCheck the specified parity groups.A parity group that is not mounted is
included in the specified parity groups.
687853005
WCheck the status of the specified parity
groups.
A parity group that is not blocked is
included in the specified parity groups.
687863005
WWhen the pool cannot be restored, wait
for a while, click [Refresh] or [Refresh
Failed to restore the pool. Pool cannot
be restored when it is in following
status:
687973005
All] on the [File] menu of the Remote
Web Console window, then check the
pool status in the pool window.
• It is taking time for processing
because some blocked parts exist in
the storage system.
If this problem persists, refer to the
troubleshooting section in the HP P9000
• The pool volume is blocked.
Provisioning for Open Systems User
Guide.
92 Message (part code group 3nnn)