HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 33 Error codes (part code 3005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
maintained is in PSUS status or being
restored.
WCancel the pair definition, then retry the
operation.
A Snapshot pair is defined.586263005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
587063005
WCheck the setting of the specified volume.The specified volume is used as a
System Disk volume.
656503005
WCheck the setting of the specified volume.The specified volume is used as a Thin
Provisioning volume.
656593005
WRelease the association between the pool
volume and the Thin Provisioning volume.
The pool volumes associated with the
Thin Provisioning volume is included in
the items to be maintained.
656713005
WCheck the setting and status of the LDEV
in the specified parity group.
The LDEV to be operated is not included
in the specified parity group.
656753005
WConfirm that it is associated with a pool
in the same CLPR.
The association cannot be made
because the pool is in a different CLPR.
656763005
WCancel the format processing from the
SVP, then retry the formatting processing
again.
A failure occurred while formatting.656883005
WCancel the quick formatting processing
from the SVP, then execute the quick
formatting processing again.
A failure occurred while quick
formatting.
656893005
WCheck the settings and retry the
operation.
The specified volumes contain volumes
that are being quick formatted.
656903005
WCheck the status and wait until the status
changes to a status that maintenance is
possible.
Preparing for quick format.656913005
WSelect only the volumes that quick format
can be executed and execute quick
format.
The specified volumes contain volumes
that quick format cannot be executed.
656923005
WAdd the System Disk, or restore the
blocked System Disk then retry Quick
Format.
Quick Format cannot be executed.
There is no System Disk area for Quick
Format, the capacity of the System Disk
656933005
If this problem persists even though the
system disk is normal and has enough
is insufficient, or the System Disk is
blocked.
capacity, please contact HP Technical
Support.
WChange the setting or execute the quick
formatting process after the quick format
Quick format cannot be executed
because the number of parity groups
656943005
processing for other parity groups has
completed.
being quick formatted has exceeded
the maximum.
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
656953005
WSelect only the volumes that can be
formatted and format the volumes.
The specified volumes contain volumes
that cannot be formatted.
657173005
WCheck if the configuration changing
process by RAID Manager, Auto LUN,
The configuration changing processes
are conflicting at DKC.
657403005
Part code 3005 91