HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 33 Error codes (part code 3005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
• Replacement of an OEM drive
microprogram is in progress
• LDEV Shredding is in progress
Therefore the specified operation
cannot be executed.
WIf the Concurrent Copy or the Compatible
XRC operation is in progress in the target
The Concurrent Copy or the Compatible
XRC operation is in progress in the
target volumes.
22003005
volumes, cancel the Concurrent Copy
job or delete a Compatible XRC pair via
the host. If the Concurrent Copy or the
Compatible XRC operation is not in
progress in the target volumes, issue the
LISTSESS and LISTDVCS commands,
check the SESSION ID No., and
terminate SESSION by means of the
TERMSESS command.
WCheck the settings, then retry the
operation.
Processing cannot be performed
because of Data Retention settings.
22013005
WCheck the settings, then retry the
operation.
The specified volume cannot be
processed due to the effect of the
22023005
access attribute assigned by Volume
Retention.
WCheck the settings, then retry the
operation.
Processing cannot be performed
because of Volume Security for
Mainframe settings.
22033005
WDelete or suspend all pairs belonging to
journal volumes to be maintained.
Devices to be maintained include
journal volumes.
22043005
WDelete all pairs belonging to journal
volumes to be maintained.
Devices to be maintained include
journal volumes.
22053005
WShred or format the specified LDEV. If
the specified LDEV is Thin Provisioning
volume (V-VOL), recover the pool first.
The restore operation has been failed,
because the specified LDEV was not
shredded or formatted.
25113005
EPlease contact HP Technical Support.The restore operation has been failed,
because the system cannot access the
specified LDEV.
25123005
WRelease the pair definition or delete
command devices defined by Business
One of the following is defined: a
Remote Copy pair, a Continuous
25153005
Continuity Manager, and then retry the
operation.
Access Journal pair, or a Continuous
Access Journal Z pair. Alternatively,
command devices defined by Business
Continuity Manager are included.
WDelete the pair definition or suspend the
pair, and then retry the operation.
One of the following is defined: a
Remote Copy pair, a Continuous
25163005
Access Journal pair, or a Continuous
Access Journal Z pair.
WSplit the pair, and then retry the
operation. If the Quick Split mode is on,
The target volume is defined as a pair
of Business Copy, Business Copy Z, or
25173005
suspend the pair, and then split the pair.Snapshot. Or, the volume is used in
Change the setting to not use the volumesCompatible FlashCopy Compatible
FlashCopy SE, or Compatible XRC. of the Compatible FlashCopy Compatible
FlashCopy SE, or Compatible XRC as a
target volume, and then retry the
operation.
86 Message (part code group 3nnn)