HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Part code 2010
Table 32 Error codes (part code 2010)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCorrect the settings, then retry.The LUSE volume cannot be released
because the access attribute of the
specified volume is not Read/Write.
50302010
WCorrect the specified content, and retry.There are no LDEVs to set the LUSE top
volume. Check the specified LDEVs.
50322010
WCorrect the specified content, and retry.There are no available LDEVs to make
the LUSE. Check the specified LDEVs.
50332010
WSelect LDEV and retry.No LDEV is specified.50502010
WCheck the content of the operation.You cannot delete the first LDEV of a
LUSE volume.
50512010
WCheck the content of the operation.More than 36 volumes cannot be
combined to form an LUSE.
50542010
WFollow the correct operation procedure.The size of the LUSE volume exceeds
64,424,505,600 KB.
50552010
WFollow the correct operation procedure.The specified LDEV is inaccurate.50562010
WClick [OK] to continue the operation.
Click [Cancel] to stop the operation.
Are you sure you want to perform the
LUSE operation on a volume that has a
path definition?
58122010
WSpecify the LUSE displayed in blue bold
italic characters.
There are no LUSE volumes that can be
reset. Check the specified volumes.
58152010
iTo continue processing, click [OK]. To
stop processing, click [Cancel].
The specified volumes will be expanded
to LUSE volume. All data in each LDEV
90102010
will be initialized. Do you want to
continue?
WTo continue processing, click [OK]. To
stop processing, click [Cancel].
The specified LUSE volume will be
released. All data in the volume will be
destroyed. Do you want to continue?
90602010
iTo continue processing, click [OK]. To
stop processing, click [Cancel].
The specified volumes will be expanded
to LUSE volume. Do you want to
continue?
93552010
iTo continue processing, click [OK]. To
stop processing, click [Cancel].
The selected LUSE volume will be reset.
Do you want to continue?
93582010
iTo continue this operation, click [OK].
To cancel this operation, click [Cancel].
Are you sure you want to perform the
LUSE operation using volumes that have
different CLPR numbers?
550072010
WDelete the path set to the LUSE volume,
then retry the operation.
The LUSE volume configuration cannot
be released because a path is set to the
551122010
LUSE volume. Delete the path, and then
release the LUSE volume configuration.
84 Message (part code group 2nnn)