HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 31 Error codes (part code 2005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the settings.The combination order of LUSE volume
is incorrect.
19252005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20052005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20092005
WIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20132005
WIf the same error occurs despite retrying,
please contact HP Technical Support.
An error occurred while connecting to
the storage system.
20152005
WIf the same error occurs despite retrying,
please contact HP Technical Support.
An error occurred while connecting to
the storage system.
20322005
WUnmount the host and cancel reservation
of the device. If the host is an AIX host,
Processing is disabled because the host
is mounted or the device is reserved.
20822005
unmount the host, and execute the
varyoffvg command.
WCheck the DKC status and the current
status of the configuration setting. If
The subsystem status is invalid.20832005
necessary, re-execute the setting
operation.
WCheck the DKC status and the current
status of the configuration setting. If
The subsystem status is invalid.20842005
necessary, re-execute the setting
operation.
EIf the problem persists, please contact
HP Technical Support.
The operation cannot be performed,
because the SVP microcode version does
20982005
not match the DKCMAIN (subsystem)
microcode version.
WWait a while, then retry the operation.
If the same problem persists, please
contact HP Technical Support.
The operation cannot be performed,
because an inoperative Processor exists.
20992005
WCorrect settings, then retry.The specified volume cannot be
combined as a LUSE volume because it
25022005
is not Read/Write attribute (S-VOL
enabled).
WCorrect settings, then retry.The LUSE volume cannot be released
because the attribute of the specified
25032005
volume is not Read/Write (S-VOL
enabled).
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
30022005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
30032005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
30062005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
50132005
82 Message (part code group 2nnn)