HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 28 Error codes (part code 01022) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the setting(s).Changing to the external or the initiator
port cannot be done, because a host
group other than Host Group 0 is set.
10507901022
WDelete LUN Path from the host group in
the specified port.
The specified port cannot be changed
into External or Initiator.
10508001022
WCheck the channel PCB.The setting cannot be changed because
of the unsupported port speed.
10508101022
ERetry the operation. If the same problem
occurs again, close the windows, refresh
The specified port does not exist in the
configuration.
10508201022
it, then retry again. If the same problem
persists despite retrying, please contact
HP Technical Support.
WCheck the setting(s).There is a radio button that is not
selected.
10508301022
WCheck the setting(s).The setting cannot be changed, because
an invalid value has been input.
10508401022
WCheck the setting(s).The setting cannot be changed, because
the value of UUID is outside the range.
10508501022
WCheck the setting(s).The input value of the starting LUN ID is
outside the range.
10508601022
WCheck the setting(s).The LUN ID cannot be set, because the
value is outside the range.
10508701022
WCheck the check boxes for the items that
you want to change, then retry the
operation.
The table column is not selected.10508801022
WCheck the setting(s).The number of LUNs that can be set to
the specified port has exceeded the
maximum.
10508901022
WCheck the setting(s).The specified LDEV and an LDEV with
LUN registered to the specified host
group have the same ID.
10509001022
WCheck the setting(s).The number of selected host groups that
can be set exceeds the maximum value.
10509101022
WCheck the setting(s).The attribute of the specified port is
neither Target nor RCU Target.
10509301022
WSpecify the HBA WWN with 16 digits
in hexadecimal.
The length of the HBA WWN is
incorrect.
10509401022
WCheck the setting(s).An LDEV for FICON(R) Data Migration
is selected.
10514501022
WInstall the program product. Or, execute
the operation with the user who has an
The operation cannot be executed
because the program product is not
10520401022
editorial permission, or set the editorial
permission to the user.
installed or there is no editorial
permission to the user.
WCheck the setting(s).The number of LUNs that can be set to
the specified port has exceeded the
maximum.
10520701022
WCheck the setting(s).The specified host cannot be added
because the HBA WWN or the host
10520801022
Part code 01022 73