HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 27 Error codes (part code 1005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WRelease the reserved attribute of the
target volume by using Data Retention.
No settings can be made because of a
volume reserved for RAID Manager.
25041005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
30021005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
30031005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
30061005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
30071005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
50101005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
50131005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
50991005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
60001005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
60121005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
60361005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
60401005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
60501005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
70601005
EIf the same error occurs despite retrying,
please contact HP Technical Support.
An error occurred while connecting to
the subsystem.
80011005
EIf the same error occurs despite retrying,
please contact HP Technical Support.
An error occurred while connecting to
the subsystem.
81001005
ERetry the same operation several times.
If the same error occurs, please contact
HP Technical Support.
This function is not supported.81021005
ECheck the setting(s), then retry the
operation.
The configuration information being set
does not match the current configuration
information.
552061005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
555001005
WCheck the setting.The specified port is not a fibre port.555531005
WCheck the setting.The specified WWN is not registered.555541005
WCheck the setting.The value of the WWN is not specified
or is set to zero.
555551005
68 Message (part code group 1nnn)