HP P9000 Remote Web Console Messages (AV400-96401, October 2011)
Table 27 Error codes (part code 1005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
and request the configuration information
setting again.
WThe configuration information has been
changed already. Check the settings,
Invalid host mode.10221005
and request the configuration information
setting again.
WThe configuration information has been
changed already. Check the settings,
Invalid Fibre address.10231005
and request the configuration information
setting again.
WThe configuration information has been
changed already. Check the settings,
Invalid Fibre topology information.10241005
and request the configuration information
setting again.
WThe configuration information has been
changed already. Check the settings,
The specified LU path does not exist.10251005
and request the configuration information
setting again.
WCheck the specified contents, then retry
the operation.
LUN security setting has been made to
a non-Fibre port. LUN security is a
function of LUN Manager.
10591005
WFirst, add paths, then click Apply. Next,
turn off the security switch, then click
Apply.
Security Switch Off operation and path
adding operation cannot be performed
simultaneously.
10611005
WCheck the specified contents, then retry
the operation.
The specified WWN is already in use.10631005
WThe configuration information has been
changed already. Check the settings,
You are trying to register the same
WWN that is already registered.
10641005
and request the configuration information
setting again.
WCorrect the specified contents, and
request the setting of the configuration
information again.
The specified host name or the host
group name is already registered. (The
host name and the host group name
cannot be the same.)
10651005
WThe configuration information has been
changed already. Check the settings,
WWN number, which is not registered,
is specified. (When deleting, or
changing)
10661005
and request the configuration information
setting again.
WThe configuration information has been
changed already. Check the settings,
You are trying to register the same host
group number as the already registered
one.
10671005
and request the configuration information
setting again.
WThe configuration information has been
changed already. Check the settings,
The specified host group has not been
registered.
10681005
and request the configuration information
setting again.
Part code 1005 63