HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 22 Error codes (part code 0605) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the status of the mapping path
and resolve the root cause of blockade,
then retry the operation.
An external volume was not able to be
recovered.
689010605
WCheck the status of the mapping path
and resolve the root cause of blockade
if needed, then retry the operation.
The external volume was able to be
restored, but some of mapping paths
were not able to be restored normally.
689020605
WCheck the states of the external volume
and the mapping path, and do not retry
Failed to disconnect from the external
volume.
689030605
the operation until the states return to
normal.
If the states cannot be restored to normal,
or if the problem persists despite retrying,
please contact HP Technical Support.
WRecover the blocked Processor Blade,
then specify it.
The specified Processor Blade is blocked.780310605
WCheck the specified Processor Blade.The specified Processor Blade is not
mounted.
780320605
WDelete unnecessary volumes, then retry
the operation. If this problem persists,
please contact HP Technical Support.
A sufficient Cache Control Device cannot
be allocated to the target volume.
780470605
WIf the problem persists despite retrying,
please contact HP Technical Support.
Failed to get the user information.780480605
WVerify the resources allocation for the
user with security administrator role.
The operation cannot be done because
the port which belongs to a resource
780490605
group to which the user has no access
right is connected to the specified
external port.
WVerify the resources allocation for the
user with security administrator role.
The operation cannot be done because
the port which belongs to a resource
780500605
group to which the user has no access
right is connected to the specified
external path.
WVerify the resources allocation for the
user with security administrator role.
The operation cannot be done because
the port which belongs to a resource
780510605
group to which the user has no access
right is connected to the specified
external path group.
WVerify the resources allocation for the
user with security administrator role.
The operation cannot be done because
the specified WWN is derived from the
780520605
port that belongs to a resource group to
which the user has no access right.
WVerify the resources allocation for the
user with security administrator role.
The specified external volume cannot be
used because the user has no access
780530605
right to a resource group to which the
external volume belongs.
WVerify the resources allocation for the
user with security administrator role.
The operation cannot be done because
the specified external path contains the
780540605
external volume that belongs to a
resource group to which the user has no
access right.
WVerify the resources allocation for the
user with security administrator role.
The operation cannot be done because
the specified external path group
780550605
Part code 0605 55