HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 22 Error codes (part code 0605) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WRelease the definition of a reserved
volume, then retry the operation.
The volume is reserved by Auto LUN.25220605
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
30030605
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
50130605
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
50990605
WInstall the necessary program product(s).A necessary program product is not
installed.
55110605
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
58270605
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
58280605
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
60120605
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
60220605
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
65330605
WReduce the number of external volumes
registered in the storage system, then
retry the configuration operation.
The number of external volumes that can
be registered in the storage system has
reached the maximum.
65340605
WRelease the LUN Path, then change the
configuration again.
The configuration cannot be changed
because the LUN Path is remained in the
target volume.
65350605
WRelease the LUSE volume, then change
the configuration again.
The target volume cannot be changed
due to its LUSE configuration.
65360605
WCheck the error factor in the others
settings.
The setting process has not been
executed because there is no error in this
setting, but an error in the others settings.
65370605
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
80000605
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
80010605
WCheck whether the DKCMAIN microcode
version and the SVP microcode version
are mismatched.
This function is not supported.81020605
WWait for a while, then retry the
operation.
Another maintenance processing is in
progress.
81220605
WCheck the licensed capacity, then specify
it within the licensed capacity or add the
licensed capacity.
The command was rejected, because the
licensed capacity has exceeded the
maximum.
81360605
WRelease the configuration definition of
Compatible FlashCopy, then retry the
operation.
The configuration of Compatible
FlashCopy or Compatible FlashCopy SE
is defined.
81400605
Part code 0605 49