HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 96 Error codes (part code 20122) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
registered in any group is not allowed
to access any LUN. Do you want to
continue this operation?
WTo continue processing, click [OK]. To
stop processing, click [Cancel].
All the hosts connected to the target ports
are only allowed to access a LUN that
10607420122
is defined in the group #00. This will
lead the possibility that LUNs, which are
defined in the group other than #00
being used at present, cannot be
recognized, then the file system might
be destroyed. Do you want to continue
this operation?
WTurn the security switch on.The configuration does not become
effective until the security switch is turned
on.
10607520122
WClick [OK] and verify the current
configuration displayed in the list.
The specified item could not be
displayed because the configuration had
been changed.
10607920122
WIf you do not want to continue, click
[Cancel] and go back to Delete LUN
Are you sure to execute "Shred LDEVs"?
This task execution deletes all of the
10608920122
Paths window, then click [Finish] to
complete.
target LDEV data and the data cannot
be recovered.
EPlease contact HP Technical Support.An internal logic error occurred.10701920122
WCheck the state of installed licenses on
the license window.
Remote Web Console cannot be used
because there is no license of Remote
Web Console.
10802920122
To use Remote Web Console, set the
license of Remote Web Console to the
installed state.
WCheck the expiration date of the program
product on the license key window.
There is a license that {0} day(s) remain
to end.
10803020122
Purchase a new license if you want to
continue to use the program product.
WCheck the expiration date or the license
capacity of the program products on the
There is a license that {0} day(s) remain
to end, or a license whose capacity is
insufficient.
10803120122
license key window. Purchase new
licenses if you want to continue to use
those program products.
WTo use Remote Web Console, login
again with the user who has the
Remote Web Console cannot be used
because there is no reference authority
of Remote Web Console.
10803220122
reference authority of Remote Web
Console.
ERefresh the window, then retry the
operation. If the same problem persists
A time-out error occurred.10803320122
despite retrying, please contact HP
Technical Support.
iClick [OK], then continue the operation.The processing is terminated normally.10900120122
WClick [OK], then continue the operation.The processing is not executed.10900220122
WOpen the task window, then set the auto
delete to disable for tasks in the
The number of tasks with auto delete
disabled has reached the maximum.
10900320122
328 Message (part code group 20nnn)