HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 96 Error codes (part code 20122) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WThe status of the task might be changed.
Close the window, then check the task
status.
The task cannot be deleted.10505920122
WThe status of the task might be changed.
Close the window, then check the task
status.
The task cannot be suspended.10506120122
WThe status of the task might be changed.
Close the window, then check the task
status.
The task cannot be restarted.10506320122
WThe status of the task might be changed.
Close the window, then check the task
status.
The task cannot be aborted.10506520122
WCheck the setting(s).This task cannot be aborted.10506620122
WCheck the setting(s).The auto delete has already been set to
disable.
10506820122
WCheck the setting(s).The auto delete has already been set to
enable.
10506920122
WTo continue the processing, click [OK].
Otherwise, click [Cancel].
This operation has a possibility to cause
conflict of setting items with the task of
10527820122
"In progress" or "Not run.” Note the
conflict of set items. Do you want to
continue?
WInput in the form of IPv4.IP address is not input in the form of
IPv4.
10536920122
WInput in the form of IPv6.IP address is not input in the form of
IPv6.
10537020122
EIf the same problem persists despite
retrying, please contact HP Technical
Support.
An unexpected error occurred.10600420122
EConfirm the details of the error from the
following error code list.
An error occurred.10603920122
ECheck the details of the error from the
following error code list.
An error occurred.10605620122
ECheck the details of the error from the
following error code list.
An error occurred.10605720122
ECheck the details of the error from the
following error code list.
An error occurred.10605820122
ECheck the details of the error from the
following error code list.
An error occurred.10605920122
ECheck the details of the error from the
following error code list.
An error occurred.10606020122
ECheck the details of the error from the
following error code list.
An error occurred.10606120122
WCollapse other tree nodes, then retry the
operation.
The tree node cannot be expanded any
further.
10607220122
WTo continue processing, click [OK]. To
stop processing, click [Cancel].
Only a host registered in a group is
allowed to access a LUN that is defined
10607320122
in the target group. A host that is not
Part code 20122 327