HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 89 Error codes (part code 9605) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the logical volume configuration,
then retry the operation.
This logical volume cannot be selected
because it is used as a volume for System
Disk.
680029605
WVerify the cresources allocation for the
user with security administrator role.
The specified LDEV cannot be used
because the user has no access right to
750159605
a resource group to which the LDEV
belongs.
WVerify the available LDEVs.The setting operation cannot be done
because all LDEVs allocated to the
765149605
resource group have no access right for
the resource group.
Part code 9610
Table 90 Error codes (part code 9610)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
70609610
WIf this problem persists, please contact
HP Technical Support.
There is an invalid value in the Data
Retention information.
74429610
WMount volumes, then retry the operation.There is no valid volume.81129610
WTo continue processing, click [OK]. To
stop processing, click [Cancel].
The value that is under setup is not
reflected yet. Do you want to continue
the operation?
91079610
iTo change the mode, click [OK].
Otherwise, click [Cancel].
Do you want to change the expiration
lock mode?
93629610
WCorrect the retention term, then retry the
operation.
The specified retention term exceeds the
maximum.
93639610
316 Message (part code group 9nnn)