HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 89 Error codes (part code 9605) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSet the expiration lock to Disable, then
change the access attribute.
You cannot change the access attribute
because the expiration lock is set to
Enable.
81569605
WRetry the operation after the process is
completed.
The specified operation cannot be
executed because the LDEV shredding
or the LDEV format is being executed.
584049605
WSelect another volume.The attribute of the pool volume cannot
be changed.
584129605
WSelect another volume.The attribute of the virtual volume of the
Snapshot cannot be changed.
584139605
WSelect another volume.The attribute of the P-VOL or the S-VOL
of the Snapshot cannot be changed.
584149605
WRelease or suspend the Continuous
Access Journal volume.
The access attribute cannot be changed,
because the status of the specified
584189605
Continuous Access Journal volume is in
"PAIR" or in "COPY."
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
584229605
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
584239605
ERestore the logical volume.The specified logical volume is blocked.584249605
WMake the setting to another logical
volume.
A retention term is set to the specified
logical volume.
584299605
WRetry a little later.This logical volume is busy.584349605
WRetry a little later.This logical volume is busy.584359605
WSee the Data Retention window and
check the following about the logical
volume you have selected:
The access attribute of the logical volume
has already been changed.
584369605
• The access attribute must be
Read/Write
• The logical volume must be able to
be specified as an S-VOL
• You must be able to set a path to the
logical volume using the RAID
Manager or Remote Web Console
• No mode is set using the RAID
Manager
WCheck the logical volume configuration,
then retry the operation.
This logical volume is configured as a
command device.
584389605
WSelect a logical volume whose emulation
type is OPEN-V.
The emulation type of the logical volume
is not OPEN-V.
584429605
WRetry the operation after the logical
volume has recovered from the blocked
The specified logical volume is blocked,
or the LDEV is being formatted or
shredded.
584489605
status or after the LDEV has been
formatted or shredded.
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
584509605
Part code 9605 315