HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 81 Error codes (part code 9005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the DKC-MAIN version.This function is not supported.81029005
ECheck the DKC-MAIN version.The subsystem status is invalid. Please
contact HP Technical Support.
81039005
WInstall PCBs for mainframe computers,
then retry the operation.
No PCBs for mainframe computers are
installed.
86599005
EPlease contact HP Technical Support.This function cannot be used by the
storage partition administrator.
565249005
WVerify the resources allocation for the
user with security administrator role.
The specified LDEV cannot be used
because the user has no access right to
750159005
a resource group to which the LDEV
belongs.
Part code 9007
Table 82 Error codes (part code 9007)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
50999007
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
60129007
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
70709007
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
70719007
Part code 9010
Table 83 Error codes (part code 9010)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf the same problem persists despite
retrying, please contact HP Technical
Support
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
74409010
WCheck the device emulation type or the
definition of the journal volume.
There are no valid volumes.93039010
WIf you want to apply the setting, click
[Yes]. If not, click [No].
In the environment where the host is
connected, the performance of host I/O
593419010
might be decreased if the alias volume
is added to more than one CU at a time.
Addition of the alias volume for one CU
is recommended.
Do you want to apply this setting?
Part code 9007 305