HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 76 Error codes (part code 8510) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WApply the tentative settings with no parity
groups to the CLPR that you have
created, then migrate the parity group.
The Parity Group cannot be migrated to
the CLPR that you newly created. Please
apply the tentative settings with no parity
552628510
groups to the CLPR that you have
created, and then migrate the parity
group.
WMigrate all parity groups in the CLPR to
another CLPR, then delete the CLPR.
The CLPR that has some parity groups
cannot be deleted. Migrate all parity
556368510
groups in the CLPR to another CLPR, and
then delete the CLPR.
EIf you clicked [Yes], set the changes
again.
The partition configuration may contain
some inconsistent information.
570018510
If you clicked [No], retry the operation.
If this problem persists, please contact
the system manager.
To initialize the partition configuration,
click [Yes]. To stop the operation, click
[No].
WCheck the settings.The maximum number of SSIDs that can
be registered will be registered except
the duplicate SSIDs.
590678510
iCheck the settings.The SSID(s) are associated with the
specified CU. All SSIDs that are
591018510
associated with the CU are to be added
to this SLPR.
iCheck the settings.The SSID(s) are associated with the
specified CU. All SSIDs that are
591028510
associated with the CU are to be deleted
from this SLPR.
WDelete unnecessary SSIDs from this SLPR,
and then retry the operation.
SSIDs that are associated with the
selected CU cannot be added to this
591108510
SLPR because too many SSIDs have been
set in the SLPR.
ECheck the settings.Ports in high-speed mode are set across
multiple SLPRs. If you perform this
591148510
operation, the user having access to
these SLPRs will become unable to use.
Do you want to continue this operation?
iClick [OK].Notice from Partition Definition:790008510
Installation of Open System Array
Management is required to create more
than four CLPRs.
iClick [OK].Notice from Partition Definition:790018510
Additional cache memory is required for
CLPR0 to create a CLPR.
iClick [OK].Notice from Partition Definition:790028510
CLPR cannot be made any more.
300 Message (part code group 8nnn)