HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 74 Error codes (part code 8505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
intended CLPR is too high. Please wait
until the write pending rate falls, and
then retry the operation.
WCheck the Cache Residency size and the
number of Cache Residency areas.
The configuration cannot be changed
because the available Cache Residency
583138505
size or the number of Cache Residency
areas in the intended CLPR is insufficient.
WRetry the operation after the maintenance
job is completed.
A maintenance job is running in the disk
subsystem (Correction Copy, Drive Copy,
583158505
If LDEV formatting, LDEV shredding or
Extent shredding is not operating, please
contact HP Technical Support.
LDEV formatting, LDEV shredding, and
Extent shredding). Retry the operation
after the maintenance job is completed.
WWait a while, then retry the operation.Parity groups in CLPR are being migrated
in the disk subsystem. Please wait for a
while, and then retry the operation.
583168505
WWait a while, then retry the operation.CLPR capacity is being changed in the
disk subsystem. Please wait for a while,
and then retry the operation.
583178505
EIf this problem persists, please contact
HP Technical Support.
An error occurred on the DKC while
obtaining information about the progress
of CLPR procesing.
583188505
WSpecify the parity groups that do not
contain any journal volumes of
The CLPR which the parity groups belong
to cannot be changed, because the
583398505
Continuous Access Journal andspecified parity groups do not include
Continuous Access Journal Z, or specifyall the journal volumes in a journal of
the parity groups that contain all the
journal volumes in the journal.
Continuous Access Journal and
Continuous Access Journal Z. Make sure
to specify the parity groups that contain
all the journal volumes in the journal.
WCheck if the configuration changing
process by RAID Manager, Auto LUN,
The configuration changing processes
are conflicting at DKC.
657408505
or Quick Restore is not in the operation,
then retry the operation.
WDecrease the cache capacity of CLPR
after releasing the Cache Residency
setting.
The cache capacity of CLPR cannot be
decreased because Cache Residency is
set to the CLPR.
750138505
WVerify the resources allocation for the
user with security administrator role.
The specified LDEV cannot be used
because the user has no access right to
750158505
a resource group to which the LDEV
belongs.
WVerify the resources allocation for the
user with security administrator role.
The specified parity group cannot be
used because the user has no access
750268505
right to a resource group to which the
parity group belongs.
298 Message (part code group 8nnn)