HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Part code 8107
Table 69 Error codes (part code 8107)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the setting.The number of lines exceeds the
maximum number of lines of a
spreadsheet.
56418107
WCheck the setting.The number of characters exceeds the
maximum number of characters of a
spreadsheet.
56428107
WIf the same error occurs despite retrying,
please contact HP Technical Support.
A time-out error occurred. Please wait
for the SVP to reboot, and then retry the
operation.
56438107
Part code 8110
Table 70 Error codes (part code 8110)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WWait about three minutes, then retry.Starting file transfer client.50018110
WThe acquired data is inaccurate. If this
problem persists, please contact HP
Technical Support.
Inaccurate data was acquired.50028110
WRetry the operation.Failed to get the data.50038110
WCorrect the first tag.The first tag is invalid.50048110
WCorrect the specified contents, and retry
the operation.
The file name should be from 1 to 32
characters.
56278110
WCorrect the specified contents, and retry
the operation.
Following characters cannot be used for
the file name: " \ / , : ; * ? < > | and
space.
56288110
WCorrect the specified contents, and retry
the operation.
The file specified by [File Name on
Client] does not exist.
56298110
WCorrect the specified contents, and retry
the operation.
The file specified by [File Name on
Client] cannot be read.
56308110
WCorrect the specified contents, and retry
the operation.
The object specified by [File Name on
Client] is not a file.
56318110
WCorrect the specified contents, and retry
the operation.
The file path should be from 1 to 255
characters.
56338110
EIf the same problem persists despite
retrying, please contact HP Technical
Support.
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
56348110
WModify mode released due to inactivity.
Restart Modify mode (press the
Modify mode released due to inactivity.
Restart Modify mode (press the
57728110
mode-switching button again) to
continue.
mode-switching button again) to
continue.
WCorrect the specified contents, and retry
the operation.
The file path of the specified file by [File
Name on Client] is incorrect.
57738110
WCorrect the specified contents, and retry
the operation.
The file specified by [File Name on
Client] is write-protected.
57748110
Part code 8107 293