HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 66 Error codes (part code 7110) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
necessary, please contact HP Technical
Support.
normal condition, and then retry the
operation.
EPlease contact HP Technical Support.An internal logic contradiction occurred.85347110
iSpecify the volume of the supported
emulation type.
The emulation type is invalid.85687110
WCheck the error code in Preview list.Some settings could not be applied
normally. Refer to the error code.
86587110
WCheck the contents, and retry.There is no volume.86597110
iThe operation ended normally. Execute
the next operation.
The requested operation has completed.90027110
iAn error occurred during the indicated
operation. See the error code for each
operation in Preview list.
An error occurred. Check the error code.90057110
iTo cancel, click [OK].Do you want to cancel?91017110
iClick [OK] to execute the operation.Do you want to apply?91027110
iTo continue processing, click [OK].
Otherwise, click [Cancel].
The option has been changed. If you
continue processing before applying the
91087110
change, the option will be reset to the
current setting. Do you want to continue
processing?
WTo continue processing, click [OK].
Otherwise, click [Cancel].
Do you want to execute the Initialize
operation?
91107110
iTo continue processing, click [OK]. To
stop processing, click [Cancel].
Do you want to enable the setting to
expand the number of relationships?
93777110
iTo continue processing, click [OK]. To
stop processing, click [Cancel].
Do you want to disable the setting to
expand the number of relationships?
93787110
WCheck the selected T-VOL.The volume in the pair status is included
in the selected T-VOL.
550037110
WCorrect the number of selected S-VOLs
and T-VOLs.
The number of selected S-VOLs is not
corresponding to the number of selected
T-VOLs.
550047110
WCheck the values, and then enter correct
values.
The entered values are incorrect.555977110
WRefresh the window, and then retry the
operation.
The operation cannot be executed
because the obtained information
contains an invalid value.
586197110
iTo continue the operation, click [OK].The CLPR used for the S-VOL differs from
the CLPR used for the T-VOL. Do you
want to continue this operation?
590007110
ETo continue the operation, click [OK].The S-VOL and the T-VOL belong to
different SLPRs. Do you want to continue
this operation?
590487110
EPlease contact HP Technical Support.The S-VOL and the T-VOL belong to
different SLPRs. If you perform this
590697110
operation, the storage partition
administrator will become unable to
operate.
Part code 7110 279