HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 65 Error codes (part code 7105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSpecify another volume.The operation failed because the
specified S-VOL was used by Compatible
FlashCopy SE, or was a TSE volume.
781217105
WSpecify another volume.The operation failed because the
specified T-VOL was a TSE volume.
781227105
WSpecify another volume.The operation failed because the
specified reserved volume was a TSE
volume.
781237105
Part code 7110
Table 66 Error codes (part code 7110)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the capacity of S-VOL and T-VOL.
Specify a volume with the same capacity,
and retry the operation.
The T-VOL size differs from the specified
source volume size.
51157110
WYou cannot create the specified pair.
Delete the created pair, then retry the
operation.
You cannot create another pair, because
the number of pairs exceeds the
maximum.
51167110
WSelect the S-VOL, and retry the
operation.
The S-VOL is not selected.51197110
WSelect the T-VOL, and retry the operation.The T-VOL is not selected.51207110
WApply the data in the Preview list. To
stop the transaction, click [OK] and
continue the operation.
The data has been changed. If you select
another tab (page), the settings will be
discarded. Are you sure you want to
continue?
51217110
WGo on to the next operation.No data has been changed.51227110
WCheck the password.The password is invalid.51237110
WMultiple volumes cannot be processed
in the operation. Process one volume at
a time.
You cannot select more than one
operation at a time.
51247110
WSelect the target volume.No target volume is selected.51257110
WYou cannot create a pair for the
specified S-VOL. Delete the created pair,
and retry the operation.
The number of pairs exceeds the
maximum.
65047110
EPlease contact HP Technical Support.Unregistered error code.73107110
WWait a while, and retry the operation.
If the same error occurs despite retrying,
please contact HP Technical Support.
The settings could not be applied.73117110
EPlease contact HP Technical Support.The password could not be acquired.73127110
EPlease contact HP Technical Support.Error details not available.73137110
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
74407110
ERetry the operation. If you get the same
message again, reboot the PC. If
A time-out error occurred. Please wait
for the subsystem to recover to the
80017110
278 Message (part code group 7nnn)