HP P9000 Remote Web Console Messages (AV400-96401, October 2011)

Table 65 Error codes (part code 7105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
configuration. Specify volumes other than
FICON(R) Data Migration Source Volume
for S-VOL, and then retry the operation.
is a FICON(R) Data Migration Source
Volume.
WThe specified operation cannot be
executed in the current pair
The command has been rejected
because the T-VOL of the specified pair
687767105
configuration. Specify volumes other thanis a FICON(R) Data Migration Source
Volume. FICON(R) Data Migration source volume
for T-VOL, and then retry the operation.
WThe specified operation cannot be
executed to FICON(R) Data Migration
The command has been rejected
because the specified volume is a
687777105
source volume. Specify a volume otherFICON(R) Data Migration Source
Volume. than FICON(R) Data Migration source
volume, and then retry the operation.
WThe operation cannot be done because
the capacity of target volume changes.
The command was rejected because the
specified S-VOL was a Thin Provisioning
688087105
Verify the capacity of the volume, and
then retry the operation.
Z volume whose capacity was being
added.
WThe operation cannot be done because
the capacity of target volume changes.
The command was rejected because the
specified T-VOL was a Thin Provisioning
688097105
Verify the capacity of the volume, and
then retry the operation.
Z volume whose capacity was being
added.
WVerify the capacity of the volume, and
then retry the operation.
The command was rejected because the
specified reserved volume was a Thin
688107105
Provisioning Z volume whose capacity
was being added.
WDelete the Continuous Access
Synchronous pair, Continuous Access
The initialize function cannot be executed
because a Continuous Access
688147105
Journal pair, or External Storage AccessSynchronous pair, or a External Storage
Manager pair that is using ThinAccess Manager pair, or a Continuous
Provisioning volumes, then retry the
operation.
Access Journal pair is created by using
Thin Provisioning volumes.
WUse another CTG, or release the pair of
Snapshot where the specified CTG is in
use.
The command has been rejected
because the specified CTG is used by
Snapshot.
688327105
WUse another CTG, or release the pair of
Business Copy Z where the specified
CTG is in use.
The command has been rejected
because the specified CTG is used by
Business Copy Z.
688337105
WUse another CTG, or release the pair of
Business Copy where the specified CTG
is in use.
The command has been rejected
because the specified CTG is used by
Business Copy.
688347105
WSpecify the volume not used as S-VOL of
SI Operation for Mainframe Fibre Data
The SI Operation for FICON(R) Data
Migration failed because more than one
688547105
Migration, or retry the operation after
deleting the current pair.
T-VOL was assigned for the specified
S-VOL.
WAssociate the specified Thin Provisioning
Z volume with a pool, and then retry the
operation.
The command was rejected, because the
Thin Provisioning Z volume specified as
S-VOL was not associated with a pool.
750027105
WAssociate the specified Thin Provisioning
Z volume with a pool, and then retry the
operation.
The command was rejected, because the
Thin Provisioning Z volume specified as
T-VOL was not associated with a pool.
750037105
276 Message (part code group 7nnn)